YACHT DECKS patios and wooden garden furniture look beautiful. In order that they remain beautiful, surface protective treatment is important. Here, the amount of maintenance needed depends significantly on the type of wood. In particular, hardwoods such as teak are naturally very resistant and need very little protection. However, the weather causes the wood to adapt a silver grey colour over time. Not everyone likes the natural patina. If you wish to avoid this discolouration, you can refresh the natural colour of the wood regularly
A highly effective variant to protect the wood against sun, rain and greying, is the „OLI-NATURA Yacht & Teak Oil.“ Equipped with UV protection, it lends a weatherproof surface to terraces, pool surroundings, boat decks and garden furniture made of hard and exotic woods and pressure treated softwood. The oxidative drying oil, based on linseed oil, penetrates deep into the wood and fills the capillaries. This makes it very water resistance. The wood remains porous and diffusion permeable. Absorbed humidity can therefore be re-emitted. In addition to the clear variant „Natural“, the pigmented variant „Teak“ is available for colouring and colour preservation of the wood. Both oils are free of biocides and therefore also suitable for wood indoors.
Oiled wood also turns grey over time. If you wish to avoid this discolouration for reasons of appearance, you should refresh the natural colour of the wood regularly. In order to this, before coating with oil, the surface should be cleaned with water and „OLI-NATURA Wood Outdoor Cleaner“, which is scrubbed with a nylon brush in the direction of the grain, depending on the degree of dirt and contamination. With garden furniture, it is advisable to briefly smooth the roughened wood fibres with fine sandpaper once again. After rinsing and drying, apply one or two coats of „OLI-NATURA Yacht & Teak Oil“ with an oil brush, roller or cotton cloth. Depending on the temperature, it will be dust-dry after 1-2 hours and fully hardened after 2-3 days. Subsequent oiling can be done without sanding.
+49(0)37208 84 219geschaeftsleitung@oli-lacke.deDownload VCF file
Get all news by email.<br />Once a month, you will receive information about our new products,<br />Relevant processing instructions and object reports.
Sign in now