Advantages Description Colors Maintenance Downloads Contact & FAQ

OLI-AQUA DOMO 15.40 | 1C Parquet sealer

Water-based 1C Parquet floor sealer for floors subject to normal wear.

Water-based 1c-parquet sealer for normally used floors and stairs made of wood, cork and OSB
Ready to use - easy to apply with roller, brush, spatula
3 roll-on applications with each 100-120 g/sqm per coat (8-10 sqm/l)
Very quick spatula application possible
Optimal drying phase, excellent flow and levelling
Highly transparent, brings a warm colouration in wooden floors
Above average chemical and mechanical resistance in the Home category
Emission-tested construction product according to DIBt principles

The product

OLI-AQUA DOMO 15.40 I 1c parquet sealer is the ideal one-component water-based sealer for parquet and wood floors in living areas subject to normal and high wear, at a convincing cost-performance ratio. Its easy application with excellent levelling and without leaving brush marks guarantees for an optically perfect finish. The sealer coat is both resistant to wear and extremely clear. In combination with its colour intensifying effect, OLI-AQUA DOMO is not only suitable for common wood types, such as oak and beech, but also for darker woods. Also suitable as a within-one-day system through combined application with spattle and roller

Order notes
Testing standards
Application description

Ordering Code:

Matt (A00729), semi matt (A00728)

Packaging:

1, 5 liters

Consumption:

3 roll-on applications I 100-120 g/sqm per coat (8-10 sqm/l)

Tools:

Micromeister’ roller for water-based lacquers, stainless steel spattle

EU – Decopaint Directive
Z-157.10-15 (low-emission; certified construction product in accordance with DIBt standards)
DIN 71-3 (safety of toys)
DIN 53160 (saliva and sweat proof)
DIN 68861 T1 B, C (resistance to chemicals)
DIN 68861 T4 (scratch resistance)
free of NMP and NEP

Handling instructions: Optimum processing conditions are: +20°C and 50% relative humidity. Do not use at floor temperatures below +15°C. Apply material at room temperature and shake well before use! Do not pour the material on the ground, apply directly out of the container. Please consult our technical department for the use on exotic woods! An intermediate sanding is indispensable if the intermediate drying time exceeds 12 h. Use a roller instead of a spattle on delicate wood types, such as beech, maple or ash! Due to the strong colour intensifying effect, use spattle only when applying DOMO also as top coat. Overcoating on the same day after intermediate sanding!

Surface preparation: Graded wood sanding with grit 80/100/120. The finer the sanding, the lesser the wood roughens.The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicon and sanding dust.Apply a priming coat with OLI-AQUA PRIME 15.81 to minimize side-bonding. For the renovation of old parquet flooring and for critical floors, we recommend an additional roller application with OLI-Universalgrund 1.50 (universal primer) for insulation and as adhesive agent.

Setup recommendations by roller:

Roll the material in sections uniformly thinly with 100 g/sqm.
After 2-3 h drying, apply a second roll-on coat with 120 g/sqm.
After overnight drying, intermediate sanding with grit 120-150.
Vacuum-cleaning. Then third roll-on coat with 120 g/sqm.
The floor may be used with care after 5-6 h. Floor is fully wear-resistant after 8-10 days.

Colors:DOMO