OLI-EP 2K Dickschichtlackfarbe F 18251 - two-component thick film lacquer paint -
Two-component, high solid, epoxy resin based thick film lacquer paint for the use in the interior and as outside undercoat, for coating systems with particularly high chemical wear. (Licensed according to the German Railway specification TL 918 300, page 40)
- Application as top coat
- Excellent long-term corrosion protection
- High solid system
- High elasticity
- Optimum resistance to chemicals
- Eco-friendly according to the VOC directive
- Lead- and chromate-free
The product
Extrem festkörperreiche 2K Epoxid-Lackfarbe für Dickschichtaufbauten mit sehr guter Chemikalien-beständigkeit und ausgezeichnetem Langzeit-korrosionsschutz. Primär für die Lackierung von Chassis, Fahrwerken und Drehgestellen im Schienen- und Nutzfahrzeugbau sowie Chemieanlagen. Erfüllt die hohen Korrosionsschutzanforderungen nach C5 -DIN EN ISO 12944-5 (Zulassung nach DB- Spezifikation TL 918300 Blatt 40).
- Order notes
- Testing standards
- Application description
Satin-gloss
20 kg
N 38950
N 39956
On demand
- Zulassung nach DB- Spezifikation TL 918300 Blatt 40
- Erfüllt Korrosionsschutzanforderungen nach C5 -DIN EN ISO 12944-5
Surface pre-treatment:
The surface must be dry, clean and free of rust, grease and separators. Test existing coatings for suitability, capacity and bonding strength. Remove defective and unsuitable coatings thoroughly and dispose of them according to the regulations.
Steel/ Stainless steel | Degrease the surface with OLI Universal cleaner 9002; Sandblast rust and rolling skin. When removing rust by sandblasting, proceed in compliance with DIN EN ISO 12944-4, i.e. standardized purity grade SA 2 ½. In case of chemical pre-treatment, follow operation procedures of the producer. |
Aluminium | Degrease the surface with OLI Universal cleaner 9002 and, if necessary, roughen the surface thoroughly (sandblasting, sweeping, sanding). In case of chemical pre-treatment, follow operation procedures of the producer. |
Zinc | Degrease the surface with OLI Universal cleaner 9002. White rust and other oxidation coats have to be removed chemically or mechanically. |
Plastics/ GRP | Wash the surface with OLI Universal cleaner 9002. If necessary, sand the surface slightly and wash again with OLI Universal cleaner 9002. |
Aged lacquer coats | Sand aged, non-defective, non-bleeding and non-thermoplastic lacquer coats slightly. Lacquer coats based on alkyd resins must be fully cured. |
Priming
Priming | OLI-EP 2K Metallgrund LAB 110136 |
Bonding to | Steel/ Stainless steel/ Aluminium/ Zinc/ Plastics/ GRP/ Aged lacquer coats |
VOC | 410 g/l |
ratio (weight proportion) | 5 : 1 with OLI-EP Hardener N 39/1184 |
Spray coats | 1 cross coat |
Coat thickness | 60 - 80 µm |
Drying 23 °C 60 °C | Touch-dry: 3 h Ready for installation: 1 h |
Top coat OLI-EP 2K Dickschichtlackfarbe F 18251
Application methods | Cup spray gun | Airless |
Spray pressure | 2,5 - 5,0 bar | 150 bar |
Nozzle | 1,7 - 2,5 mm | 0,41 mm |
Hardener (ratio, weight proportion) | OLI-EP Hardener N 38950 (100 : 15) | OLI-EP Hardener N 38950 (100 : 15) |
Thinner (addition in %) | OLI-EP Thinner N 39956, 20 - 25 % | OLI-EP Thinner N 39956 |
Viscosity | 25 - 30 s / DIN 4 mm | Mix viscosity |
Spray coats | ½ cross coat, 15 evaporation time, 1 ½ cross coats to finish | ½ cross coat, 15 evaporation time, 1 ½ cross coats to finish |
Coat thickness | 200 µm | 200 µm |
Frequently asked questions
To the FAQFits to...
OLI-EP 2K Metallgrund LAB 110136 - two-component metal primer -
High-quality two-component epoxy resin metal primer with the properties of a multi bonding primer.
(Qualification according to the German Railways specification TL 918 300, page 3)