OLI-NATURA Wood Care Wax
For care and refreshing of all Hard Wax Oil treated floors, stairs and furniture surfaces made of wood in the interior. In colourless.
- Liquid wood care wax with carnauba wax for the care and refreshment of oiled and hardwax oil-treated Wood surfaces
- Nourishes the wood from the inside, compensates for slight damage and forms an easy-care protective film on the surface
- Dirt- and water-repellent, antistatic, refreshes the wood colour
- Easy to apply with a cotton cloth, polishing pad, sprayer or weasel
- High yield: 1 litre reaches up to 50-100 m²
- Suitable for toys, without preservatives and fragrances
The product
OLI-NATURA Wood Care Oil is specifically formulated for the care and reconditioning of oiled furniture, stairs, wooden, parquet and cork flooring. It is equally suitable for factory-oiled surfaces (do a preliminary test). The wood care oil has both a reconditioning and care effect. It levels out smaller surface defects and gives the wood back its colour depth and brilliancy. It is antistatic and protects the surface reliably against dirt and water. It can be applied on the entire surface as well as partially. The material is free of biocidal substances and preservatives. The fully hardened material is non-hazardous for man, plants and animals. It is saliva and sweat proof according to DIN 53160 and meets the DIN EN 71-3 standard (safety of toys).
- Order notes
- Testing standards
- Application description
Natural (uncoloured)(A03750)
1 litre, 250 ml
1-2 coats I 40-80 g/sqm per coat (12-25 sqm/l), depending on the absorptivity of the surface. 1 litre is sufficient for circa 50-100 sqm.
lint-free cotton cloths, floor flat mop, sprayer, white pad
- Free of formaldehyde and aromatic compounds
- Without biocidal substances and preservatives
Processing recommendation:
- Prior to any care measure we recommend dry cleaning and a wet cleaning with OLI-NATURA Wood Soap. Allow the surface to dry completely.
- Shake container well before use.
- Soak white pad or cotton cloth with Wood Care Wax and massage into the wood. Remove excess after max. 10 minutes with a dry cotton cloth. No excess oil should be left behind.
- For large surfaces, apply wood care oil evenly and thinly with a sprayer or weasel, allow to work in for max. 10 minutes and polish in with a white pad by hand or polishing machine. Remove any excess oil with a cotton cloth.
Note: Cloths, pads or wood dust soaked with oil can spontaneously ignite due to heat build-up, therefore please clean immediately after use or store under water.
Safety
The product is free of biocidal substances, preservatives, cobalt and oxime. The fully hardened material is non-hazardous for human, plants and animals. It is saliva and sweat proof according to DIN 53160 and meets the DIN EN 71-3 standard (safety of toys).
Care & cleaning
DRY CLEANING: Daily cleaning of oiled / hard wax oil-treated floors should be carried out dry with a broom or vacuum cleaner, as sand and dust act like sandpaper and can cause fine scratches. Loose dust on furniture surfaces can be easily removed with a cloth.
WET CLEANING: For regular cleaning with water, the mild „OLI-NATURA wood soap“ is ideal. It is specifically designed for the needs of oiled / hard wax oil-treated hardwood floors, floorboards, wooden stairs and furniture surfaces, and ensures rapid cleanliness and restoration of oil without leaching or attacking the wood.
APPLICATION: Shake well before use! Pour OLI-NATURA wood soap at a ratio of 1:200 into lukewarm water, wipe surface and leave to dry. Finished! For stubborn stains, do not dilute before use. Wipe off with water afterwards. Mixture: 25 ml to 5 litres / 50 ml to 10 litres.
RESTORATIVE TREATMENT AND MAINTENANCE: From time to time the oiled or hard wax oil-treated wood should be given some restorative treatment and maintenance. This will renew the protective effect and buff out slight scratches. Previously hard wax oil-treated surfaces should be treated at regular intervals with „OLI-NATURA wood care wax“. Oiled wood, however, should be restored with „OLI-NATURA wood care oil“. The entire surface can be treated, but it is also possible to treat only specific areas. After such treatment, the wood is anti-static and thus attracts little dust.
APPLICATION: The surface must be totally clean, dry, and free from dust and grease before treatment.
1.1 Full-surface restorative treatment for parquet: Apply approximately 10-20 g/m² (50-100 m²/l) of OLI-NATURA wood care oil or wood care wax thinly and evenly with a mop or a sprayer; allow to take effect for a short time (max. 10 minutes) and polish in with a white pad by hand or with a polishing machine. 1.2. Partial restorative treatment for parquet: Soak a white pad with wood care oil or wood care wax (10-20 g / m²) and rub in. Remove any excess with a dry cotton cloth after a maximum of 10 minutes.
2.0. Restorative treatment for stairs: Soak a white pad with OLI-NATURA wood care oil or wood care wax (10-20 g / m²) and rub in. Remove any excess with a dry cotton cloth after a maximum of 10 minutes.
3.0. Restorative treatment for furniture: Pour OLI-NATURA wood care oil or wood care wax onto a clean, lint-free cotton cloth and apply evenly and thinly along the grain. Remove any excess with a dry cotton cloth after a maximum of 10 minutes.
Note: Let the impregnated surface dry for a minimum of 12 hours, preferably overnight. Do not wet wipe for the first few days. In the case of sensitive surfaces, test first on an inconspicuous area.
Important: Oil soaked cloths / pads may spontaneously combust due to heat accumulation. They should therefore be cleaned or soaked in water immediately after use.
Frequently asked questions
To the FAQFits to...
OLI-NATURA Wood soap
Wiping water additive for regular maintenance cleaning of oiled/waxed wooden surfaces