OLI-AQUA STANDARD 15.50 I One-component parquet sealer

Water-based 1c parquet floor sealer for floors subject to heavy wear.

  • Water-based 1c-parquet sealer for strong used floors and stairs made of wood, cork and OSB
  • Versatile use - in living and business areas
  • Provides the performance of many 2c-sealers
  • Ready to use - rollable, spreadable  
  • 3 roll-on applications with each 100-120 g/sqm per coat (8-10 sqm/l)
  • Very high chemical and mechanical resistance
  • Excellent flow an levelling thanks optimized drying phase while rolling
  • Emission-tested construction product according to DIBt principles 
OLI-AQUA STANDARD 15.50 I One-component parquet sealer

The product

OLI-AQUA STANDARD 15.50 I 1c parquet sealer is our all-round one-component water-based sealer for parquet and wood floors in all living and business areas subject to high wear. Due to its high degree of cross-linking, this hardwearing and scratch resistant PU lacquer offers a broad range of application areas, which is comparable even to many conventional two-component PU water-based sealers.

read more
  • Order notes
  • Testing standards
  • Application description
Glosslevel:

Matt (A00704), semi matt (A00701)

Packaging:

5 litre

Consumption:

3 roll-on applications I 100-120 g/sqm per coat (8-10 sqm/l)

Tools:

‘Micromeister’ roller for water-based lacquers

  • EU – Decopaint Directive
  • Z-157.10-15 (low-emission; certified construction product in accordance with DIBt standards)
  • DIN 71-3 (safety of toys)
  • DIN 53160 (saliva and sweat proof)
  • DIN 68861 T1 B, C (chemical resistance)
  • DIN 68861 T4 (scratch resistance)
  • free of NMP and NEP

Handling instructions: Optimum processing conditions are: +20°C and 50% relative humidity. Do not use at floor temperatures below +15°C. Apply material at room temperature and shake well before use! Do not pour the material on the ground, apply directly out of the container. Please consult our technical department for the use on exotic woods! An intermediate sanding is indispensable if the intermediate drying time exceeds 12 h. Overcoating on the same day after intermediate sanding!

 

Surface preparation: Graded wood sanding with grit 80/100/120. The finer the sanding, the lesser the wood roughens.The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicon and sanding dust.Apply a priming coat with OLI-AQUA PRIME 15.81 to minimize side-bonding. For the renovation of old parquet flooring and for critical floors, we recommend an additional roller application with OLI-Universalgrund 1.50 (universal primer) for insulation and as adhesive agent. 

 

Setup recommendations by roller: 

  • Roll the material in sections uniformly thinly with 100 g/sqm.  
  • After 2-3 h drying, apply a second roll-on coat with 120 g/sqm.
  • After overnight drying, intermediate sanding with grit 120-150. Vacuum-cleaning. Then third roll-on coat with 120 g/sqm.
  • The floor may be used with care after 5-6 h. Floor is fully 
  • wear-resistant after 8-10 days.

 

Colors:STANDARD

STANDARD

Care & cleaning

For maintenance cleaning and care we recommend the use of our OLI-AQUA parquet care series (CARE, POLISH, CLEAN).

read more
OLI-AQUA STANDARD 15.50 I One-component parquet sealer

Talk to us:

*Required fields

Frequently asked questions

To the FAQ

Fits to...