Greater durability for furniture and doors. OLI-CRYL Hardener 11.4 is the Hardener component for the solvent-based OLI-CRYL spray lacquers listed below. Through cross-linking, it increases the chemical and mechanical resistance of the lacquer surface - especially for heavily used furniture and doors.
One Hardener, one mixing ratio: For all three approved system products, mix 10 parts base lacquer with 1 part Hardener by volume. This makes dosing and processing easier in everyday work.
Suitable for:
-
OLI-CRYL 25.50 | 1K+2K multilayer lacquer
-
OLI-CRYL 40.55 | 1K+2K color lacquer
-
OLI-CRYL 40.40 | 1K+2K filler/insulating filler
Container sizes and dosage:
-
250 ml Hardener for 2.5 liters of base lacquer
-
1 liter Hardener for 10 liters of base lacquer
-
3 liters Hardener for 30 liters of base lacquer
The Hardener contains less than 0.1% diisocyanate monomers. Additional diisocyanate training is therefore not required. For professional use only.
TESTING STANDARDS
- Formula free from: toxic heavy metals, halogenated hydrocarbons (CKW, FCKW), polychlorinated biphenyls and terphenyls (PCB + PCT), pentachlorophenol (PCP), and formaldehyde.
- The product contains less than 0.1% diisocyanate monomers and may therefore be used without additional training.
APPLICATION INSTRUCTIONS
- Optimal application conditions at 20 °C and 50% relative humidity
- For details on application, please refer to the Technical Data Sheet for the coating component
- Shortly before use, thoroughly stir the hardener into the base lacquer in the specified mixing ratio. Allow the mixture to stand for 10 minutes before application.
- Seal opened containers tightly and use up as soon as possible. Mixed material residues must not be allowed to cure in closed containers.
- The end of the pot life is not indicated by a change in viscosity. Do not pour excess material back.
Mixing ratio
OLI-CRYL 25.50 | 1K+2K multilayer lacquer
Mixing ratio: 10:1 (10%)
Pot life: Max. 8 hours
OLI-CRYL 40.55 | 1K+2K color lacquer
Mixing ratio: 10:1 (10%)
Pot life: Max. 8 hours
OLI-CRYL 40.40 | 1K+2K filler/insulating filler
Mixing ratio: 10:1 (10%)
Pot life: Max. 8 hours
SAFETY INFORMATION
WARNING
The product contains less than 0.1% diisocyanate monomers and may therefore be used without additional training.
Regulation (EC) No. 1272/2008
Hazard-determining components for labelling: Hexamethylene-1,6-diisocyanate, homopolymer; n-butyl acetate
Signal word: Warning, flammable liquid and vapour
Hazard statements
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P405 Store locked up.
Precautionary statements
Special labelling of certain mixtures
EUH204 Contains isocyanates. May produce an allergic reaction.
Für welche Lacke ist OLI-CRYL Härter 11.4 geeignet?
Für OLI-CRYL 25.50 Mehrschichtlack, OLI-CRYL 40.55 Buntlack und OLI-CRYL 40.40 Füller/Isolierfüller. Ausschließlich mit diesen freigegebenen Stammlacken verwenden.
Was bewirkt die Härterzugabe?
Sie erhöht durch Vernetzung die chemische und mechanische Beständigkeit der Lackoberfläche. Der Härter wird besonders für stark beanspruchte Möbel und Türen empfohlen.
Wie viel Härter muss ich zugeben?
Das Mischungsverhältnis beträgt 10:1 nach Volumen. Für 1 Liter Stammlack benötigen Sie 100 ml Härter, für 2,5 Liter Stammlack 250 ml Härter.
Wie lange kann ich die Mischung verarbeiten?
Nach der Härterzugabe beträgt die Topfzeit maximal 8 Stunden. Beachten Sie das technische Datenblatt des jeweiligen Stammlacks. Auch wenn der Lack noch flüssig erscheint, kann die Topfzeit bereits abgelaufen sein.
Ist eine zusätzliche Diisocyanat-Schulung erforderlich?
Nein. OLI-CRYL Härter 11.4 enthält weniger als 0,1 % Diisocyanat-Monomere. Die vorgeschriebenen Schutzmaßnahmen und Sicherheitshinweise gelten weiterhin.
Wie lagere ich den Härter?
Kühl, trocken und gut belüftet, geschützt vor Feuchtigkeit, Hitze und direkter Sonneneinstrahlung. Im ungeöffneten Originalgebinde ist er 6 Monate haltbar. Angebrochene Gebinde nach jeder Entnahme sofort dicht verschließen und möglichst bald aufbrauchen.
Any questions? - We’re happy to help!
Frequently bought together
*applies to deliveries within Germany. Delivery times for other countries can be found in the shipping conditions