1K spray lacquer for custom and series furniture production
OLI-AQUA PRO M 18.10 is a water-based, self-crosslinking 1K multi-coat clear lacquer for furniture, chairs, shopfitting and interior fit-outs. One product serves as both primer and topcoat - ready to use, with no hardener or thinner required. This acrylic clear lacquer is suitable for solid wood, veneers and wood-based materials indoors, and is available in matte and satin finishes.
Transparent finishes - even on profiles and vertical components
High transparency and lightfastness bring out the color and grain of the wood. Excellent filling and even flow ensure a uniform finish. The spray lacquer has a medium viscosity and is thixotropic: its good sag resistance makes it suitable for coating chair frames, profiled components and vertical surfaces.
Designed to fit your production process
Fast drying, fine-powder sanding and good blocking resistance make it easier to continue processing between work steps. PRO M 18.10 can be applied with a cup gun, airless or Airmix equipment, and is also suitable for spray machines. This clear lacquer supports both custom craftsmanship and repeatable processes in series production.
The recommended coating schedule consists of two coats of 100–120 g/m² each, with intermediate sanding using P240. Accelerated heat or IR drying is possible; process conditions should be coordinated with OLI application engineering. For more application instructions, see the “Application” tab and the technical data sheet.
Durability for furniture and interior fit-outs
The coating offers good resistance to creams and plasticizers from commercially available PVC seals. Its chemical resistance meets DIN 68861-1, stress category 1C; selected test media achieve 1B.
The tested coating system is classified as flame retardant (B-s1,d0) in accordance with DIN EN 13501-1. In addition, OLI-AQUA PRO M 18.10 meets the requirements of IKEA IOS-MAT-0066 R4 for home and office furniture, as well as MÖBELFAKTA, Category 2. Details of the test reports and their scope can be found in the “Testing Standards” tab.
TESTING STANDARDS
- EU Decopaint compliant
- Flame-retardant according to DIN EN 13501-1
- DIN 71-3 (Safety of toys)
- DIN 53160 (saliva- and perspiration-resistant)
- DIN 68861 Part 1 C (chemical resistance)
- DIN 68861 Part 1 B (selected substances)
- IOS-MAT-0066 R 4 for residential and office furniture & MÖBELFAKTA standard Cat. 2.
- Free from formaldehyde and aromatics
- Free from NMP and NEP
How to apply OLI-AQUA PRO M 18.10
Preparation: The wood must be dry, clean, and free of oil, wax, grease, and silicone. Sand with P150–180 and remove all dust thoroughly. Test the product on the original substrate, especially on dark or dark-stained surfaces.
Preparing the product: Stir the lacquer thoroughly. The medium-viscosity spray lacquer is ready to use and is applied undiluted, without adding hardener. Do not apply below +15 °C. The optimal conditions are +20 °C and 50% relative humidity.
Application: Spray evenly using a cup gun, airless, or Airmix system. For a cup gun, use a 1.8–2.0 mm nozzle and a spray pressure of 2.0–3.0 bar. Refer to the technical data sheet for other spray parameters. After drying for approx. 2 hours, sand between coats with P240, remove all dust thoroughly, and apply the second coat.
Coverage: 100–120 g/m² per coat, corresponding to approx. 8–10 m²/L. Apply two coats.
Drying: Dust-dry after approx. 1 hour; can be sanded and recoated after approx. 2 hours; stackable after approx. 16 hours. Drying times depend on climate, air exchange, and the amount applied. Low temperatures, poor air exchange, and high humidity extend drying times. Forced-air or IR drying is possible; coordinate process conditions with OLI Application Technology.
Cleaning: Clean tools immediately after use with tap water.
Storage: Store in the original container in a cool, dry place, protected from frost. Reseal opened containers tightly after each use to prevent the product from drying out or forming a skin. Refer to the technical data sheet for storage temperature and shelf life.
Any questions? - We’re happy to help!
*applies to deliveries within Germany. Delivery times for other countries can be found in the shipping conditions