OLI NATURA® hardwax oil for almost all indoor wood surfaces
Oil impregnates. Wax protects. OLI NATURA® hardwax oil is the ECARF-certified oil-wax combination for almost any indoor wood project. The oil impregnates the wood from within, while the wax provides extra protection for the surface. Easy to apply, high-yielding, and fast-drying – for wood surfaces that feel silky smooth.
Which wood types and applications is OLI NATURA® hardwax oil suitable for?
One hardwax oil for many projects – instead of keeping a different wood oil in the cupboard for every application. Whether for furniture, a dining table, kitchen countertop, stairs, wood flooring, door, wall paneling, or windowsill: OLI NATURA® hardwax oil is suitable for untreated and freshly sanded indoor wood surfaces. Suitable for numerous wood types – from maple and beech to oak and ash, as well as spruce and pine. Also suitable for compatible surfaces made of cork, bamboo, OSB, plywood, and multiplex.
Want a transparent color look? OLI NATURA® COLOUR hardwax oil adds color to wood – also in Cotton White for a Scandinavian look. For a richer wood tone, choose OLI NATURA® Project Oil.
How does OLI NATURA® hardwax oil change the look and feel of wood?
The wood stays wood. The grain and wood tone are subtly enhanced, while the texture remains visible and tangible. This brings out the natural beauty of lighter woods in particular. The result: a satin-matte finish with a velvety feel. Tip: Test first, then oil. Try it on similarly prepared wood with our OLI NATURA® hardwax oil sampler. Assess the color and sheen after drying.
Is OLI NATURA® hardwax oil easy to apply?
Yes. Apply a thin coat. Remove excess. Polish. No primer or intermediate sanding needed. Untreated wood usually requires two coats; one is often enough for light use. Prefer a more matte finish? Polish the second coat while still wet with a white oil pad. Once fully cured, the surface stands up to everyday use: durable, dirt- and water-repellent. The oiled surface will not crack, peel, or flake. What if signs of wear remain? Touch up individual areas instead of sanding the whole surface. Find detailed instructions under “Application.”
What can you rely on with OLI NATURA® hardwax oil?
Tested for everyday use: ECARF-certified as allergy-friendly, tested for food contact (LFGB), and suitable for appropriately treated toy surfaces (DIN EN 71-3).
Testing, certifications and product safety of OLI NATURA® Hardwax Oil
- GISCODE Ö60+ – Oils/waxes, high in solvents, dearomatized and oxime-free.
- DIBt approval Z-157.10-17 – Emissions-tested construction product in accordance with DIBt principles.
- ECARF-certified – Awarded as allergy-friendly according to scientific criteria.
- LFGB-tested – Tested for food contact in accordance with Regulation (EC) No. 1935/2004.
- DIN EN 71-3 – Tested for the migration of certain elements; suitable for correspondingly treated children's toy surfaces.
- DIN 53160 – Saliva- and perspiration-resistant; tested for color fastness against saliva and perspiration simulants.
- Free from cobalt, oximes, formaldehyde, aromatics, biocides and preservatives.
Applying OLI NATURA® hardwax oil
Preparation: The wood must be clean, dry and absorbent. Remove old film-forming coatings. Do not sand floors and stairs finer than P100–120, or furniture and worktops finer than P240 . Then thoroughly remove dust from the surface.
Optional pretreatment: If necessary, pretreat the wood with diluted OLI NATURA® PreOilCleaner . Allow to dry completely before oiling, smooth any raised wood fibers if necessary, and remove dust again. Do not use PreOilCleaner before OLI NATURA® Antique.
Tip: We recommend applying a test coat to an inconspicuous area prepared in the same way. Assess the result after drying.
Furniture, stairs and worktops
- Stir the oil thoroughly.
- Apply a thin coat with a brush or roller in the direction of the grain. Re-oil highly absorbent areas if necessary.
- After 20 minutes , remove excess oil with an absorbent cloth.
- Polish with a lint-free cloth or white pad until the surface is dry to the touch.
- A second thin coat can be applied after 6–8 hours .
Floors
- To allow sufficient working time, thoroughly mix 10 parts hardwax oil Natural with 1 part OLI NATURA® Oil Thinner . Test the mixture on a sample area.
- Apply a thin coat in sections of 5–10 m² using a short-pile roller. Re-oil highly absorbent areas if necessary.
- Remove larger excesses with a dry, lint-free cloth.
- Within 30 minutes of application , polish with a white pad until the surface is dry to the touch. Do not leave any excess oil on the surface.
- A second thin coat can be applied after 6–8 hours .
Coverage
- Two coats of approximately 40–50 g/m²
- each Coverage per coat: approximately
20–25 m²/l
Consumption depends on the type of wood, sanding and absorbency.
- Drying Dust-dry: after approx.
- 1–2 hours Dust-dry: 6–8 hours
- Recoatable: Dust-dry: Light foot traffic:
- 24 hours Dust-dry: Fully cured:
5–7 days
Protect from moisture and heavy use until fully cured and do not clean with a damp cloth. Application conditions: The oil, wood and room must be at +15 to +25 °C
. Ensure good ventilation during application and drying. Safety – risk of spontaneous combustion:
After use, soak oil-soaked cloths and pads completely in water, then spread them out to dry outdoors. Avoid heat buildup. Further information: Before application, refer to the technical data sheet in the "Downloads"
How do you care for and clean surfaces treated with OLI NATURA® hardwax oil?
Protect freshly oiled surfaces from water until they have fully cured.
Regular cleaning: Remove dust and loose dirt when dry. Vacuum or sweep parquet floors regularly to prevent sand from causing fine scratches. Wipe the surface with a damp, not wet, cloth when needed damp, not wet and immediately wipe up any standing water. For heavier soiling, use OLI NATURA® wood soap . Avoid aggressive or abrasive cleaners.
When should the surface be refreshed?
If water repellency decreases or the wood appears dry and dull, refreshing it is recommended. Clean the surface beforehand and allow it to dry completely. For floors, stairs and furniture treated with hardwax oil, OLI NATURA® wood care waxis suitable. How often refreshing is needed depends on the level of use.
How can scratches and signs of wear be repaired?
Damaged or more heavily worn areas can be spot-sanded and recoated with OLI NATURA® hardwax oil. Completely sanding down the surface is generally not necessary.
Labelling
OLI-NATURA hardwax oil is not subject to labelling requirements and is not classified as hazardous under Regulation (EC) No. 1272/2008 (CLP). It is neither subject to mandatory labelling nor classified as dangerous goods.
⚠ Cloths, pads or sponges soaked in oil can spontaneously ignite due to heat buildup. After use, store them airtight in a metal container or under water. Alternatively, moisten them and spread them out outdoors to dry completely before disposal.
P102: Keep out of reach of children.
How many coats of OLI NATURA® hardwax oil are required?
For normally used furniture, one coat is generally sufficient. For stairs, kitchen countertops, and other more heavily used wooden surfaces, a second thin coat is recommended.
Does OLI NATURA® hardwax oil require intermediate sanding?
No. Intermediate sanding is not required. The second coat can be applied directly to the dry surface after approximately 6–8 hours.
Why does OLI NATURA® hardwax oil sometimes remain sticky?
Usually, too much material was applied or excess oil was not completely removed after the penetration time. Therefore, apply OLI NATURA® hardwax oil thinly and polish thoroughly after 15–20 minutes. Excess material can significantly delay drying.
Why does OLI NATURA® hardwax oil not dry properly?
OLI NATURA® hardwax oil dries oxidatively and requires oxygen from the air to do so. Applying too much material, low temperatures, high humidity, insufficient air circulation, or covering the surface too soon can significantly delay drying and curing.
Remove excess oil completely, ensure good air circulation during drying, and do not cover freshly oiled surfaces airtight until they have fully cured not cover freshly oiled surfaces airtight.
Why does the oiled surface appear blotchy or have uneven gloss?
The causes are often uneven sanding, differing absorbency, or unevenly remaining material. Therefore, prepare the surface evenly, apply the hardwax oil thinly, and polish off all excess oil completely.
What final sanding is suitable for OLI NATURA® hardwax oil?
Grit 120–180 is ideal for good oil absorption; for finer furniture surfaces, a final sanding up to grit 240 is also possible. The finer the sanding, the lower the wood’s absorbency may be. What matters is an even sanding pattern.
Does OLI NATURA® hardwax oil change the color of the wood?
Yes, even a colorless hardwax oil enhances the grain and natural wood tone. OLI NATURA® hardwax oil enhances the wood tone comparatively subtly and is therefore particularly suitable for light-colored woods.
Can the gloss level of OLI NATURA® hardwax oil be adjusted?
Yes. For a more matte finish, the still-wet second coat can be polished with a white pad. This gives the surface a more understated, matte appearance.
Is OLI NATURA® hardwax oil water-repellent?
Yes, after fully curing, the treated surface is water-repellent. However, freshly oiled surfaces should be protected from water for approximately 5–7 days. Wipe up liquids as soon as possible and avoid standing water.
Can scratches and signs of wear be repaired?
Yes, minor damage can generally be repaired locally. Lightly sand the affected area and re-oil it with OLI NATURA® hardwax oil. Completely sanding the entire surface is usually not necessary.
When does a surface treated with OLI NATURA® hardwax oil need to be re-oiled?
Re-oiling is done as needed, not according to a fixed schedule. If the water repellency decreases or the wood looks dry and dull, the surface should be refreshed. The maintenance requirements depend on the type of wood and the level of wear.
Any questions? - We’re happy to help!
*applies to deliveries within Germany. Delivery times for other countries can be found in the shipping conditions