Compact, water-based staining system consisting of 4 color concentrates and a colorless base stain, allowing almost all desired wood shades to be mixed quickly, easily, and individually. The OLI-AQUA EASY MIX stain series is suitable for all common fine- and coarse-pored hardwoods and softwoods. Depending on the intensity of the mixture and the application method, brilliant, evening, or expressive rustic effects can be achieved. For spraying and brushing.
APPLICATION
SURFACE PREPARATION:
- The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust.
- Sand the wood in stages using 150 / 180 grit. The finer the sanding, the less the wood can become roughened.
APPLICATION:
Spray application without wiping:
- Preferably used on fine-pored hardwoods such as beech, maple and cherry, or absorbent softwoods such as pine and spruce.
- Spray evenly until damp - not wet - using a cup gun (1.2 - 1.5 mm nozzle, approx. 2 bar spraying pressure) in a cross-coat pattern. Do not wipe off excess stain. Applying several thin coats by spraying produces a particularly even stain appearance.
Spray application with wiping:
- Preferably used on coarse-pored hardwoods and softwoods such as oak, ash, maple and mahogany.
- Apply generously in one pass using a cup gun (1.5 - 2.0 mm nozzle, approx. 2 bar spraying pressure).
- Allow the excess stain to work for 1-2 minutes, then wipe it off with a wide stain spreader, first across and then along the wood grain. Regularly wipe the brush on a cloth to remove the excess stain it has picked up. This produces a rustic stain appearance.
Brush application with wiping:
- Apply the stain evenly, generously and quickly from one edge to the other with a flat stain brush, first along, then across and once again along the wood grain.
- Allow the excess stain to work for 1 – 2 minutes, then spread it along the wood grain with a wide stain spreader.
- Regularly wipe the brush on a cloth to remove the excess stain it has picked up.
Drying times:
- Recoatability: 5-6 hrs.
RECOMMENDED SYSTEM:
- Wood surfaces treated with OLI-AQUA BEIZE EASY MIX can be recoated after 5-6 hours with all OLI-AQUA water-based lacquers and OLI-CRYL solvent-based lacquers.
- OLI-AQUA water-based lacquers should preferably be sprayed rather than applied by roller or brush, as water-based stains may otherwise lift and cause the colour shade to become blurred.
SAFETY INFORMATION
P102 Keep out of reach of children.
EUH208 Contains 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Any questions? - We’re happy to help!
Frequently bought together
*applies to deliveries within Germany. Delivery times for other countries can be found in the shipping conditions