OLI NATURA® PreOilCleaner – Wood pretreatment before oiling and deep cleaner
OLI NATURA® PreOilCleaner cleans untreated or freshly sanded wood surfaces and prepares furniture, stairs, parquet and paneling for the subsequent oil finish. It is also suitable for deep cleaning oiled and soaped wood surfaces before retreatment.
Improved oil uptake and more intense color
The pretreatment increases the wood’s absorbency, improves oil uptake and intensifies the color of colored oils. On tannin-rich woods such as oak, it reduces tannin-related reactions and, in turn, the risk of discoloration, tannin stains and water marks.
Thorough cleaning before retreatment
If regular cleaning no longer removes stubborn dirt and residue from cleaning or care products, OLI NATURA® PreOilCleaner is used for deep cleaning oiled and soaped wood surfaces. Then renew the surface protection: re-oil oiled surfaces with a suitable OLI NATURA® oil and treat soaped surfaces with a suitable wood floor soap.
Application at a glance
Before the first oiling: Dilute at a ratio of 1:4 with lukewarm water, apply evenly with a damp mop and allow to dry completely. If needed, lightly smooth any raised wood fibers, remove the dust, and then apply oil.
For deep cleaning: Dilute at a ratio of 1:20 with lukewarm water, clean with a damp mop and pick up the dissolved dirt. Wipe again with clean water using a damp mop, allow to dry completely, and then apply a suitable treatment for the surface.
Test compatibility in an inconspicuous area, especially on wood that is sensitive to swelling, such as beech, maple or wood block flooring. You can find the step-by-step instructions in the “Application” tab.
Important note: This product is not suitable for regular maintenance cleaning. When using the reactive stain OLI NATURA® Antique, the surface must not be treated with OLI NATURA® PreOilCleaner beforehand. Follow the technical data sheet.
- Giscode GG20
How to use OLI NATURA® PreOilCleaner correctly
- Prepare the wood
Sand the surface professionally and remove all dust thoroughly. Recommended final sanding grit: P180–240 for furniture, P100–150 for floors. Wood moisture content: 8–12%. Apply at a material, object, and ambient temperature of 15–30 °C. - Dilute
Shake the bottle well. Mix 1 part OLI NATURA® PreOilCleaner with 4 parts lukewarm water, for example, 100 ml cleaner with 400 ml water. - Apply dampened
Apply evenly with a well-wrung cloth, sponge, or cotton pad. For floors, use a slightly damp mop. Avoid puddles. Repeat the treatment in case of heavy soiling. - Allow to dry completely
The surface must look and feel evenly dry. Depending on the conditions and surface size, drying takes approximately 2–8 hours, or longer for larger surfaces. - Smooth and oil if necessary
After complete drying, lightly sand any raised wood fibers in the direction of the grain using a fine grit. Remove all dust thoroughly, then treat with an OLI NATURA® oil of your choice.
Tool cleaning: With water
Storage: Unopened, shelf life of at least 24 months. Protect from frost.
Important note: This product is NOT suitable for regular, daily cleaning. When using the reactive stain OLI NATURA® Antique the surface must NOT previously be treated with OLI NATURA® PreOilCleaner . Observe the technical data sheet and safety instructions.. Technisches Merkblatt und Sicherheitshinweise beachten.
Regulation (EC) No 1272/2008
Safety instructions
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P102 Keep out of reach of children.
P233 Keep container tightly closed
Wofür eignet sich OLI NATURA® PreOilCleaner?
PreOilCleaner bereitet unbehandelte oder frisch geschliffene Holzoberflächen auf das Ölen vor. Er verbessert die Ölaufnahme und intensiviert die Farbgebung bei Colourölen. Zusätzlich dient er zur Grundreinigung geölter und geseifter Oberflächen – etwa auf Möbeln, Treppen und Parkett.
Wann ist eine Grundreinigung mit PreOilCleaner sinnvoll?
Wenn hartnäckige Verschmutzungen oder Rückstände von Reinigungs- und Pflegemitteln trotz normaler Reinigung zurückbleiben. Die Grundreinigung erfolgt nach Bedarf und bereitet die Oberfläche auf die anschließende Nachbehandlung vor. PreOilCleaner ist nicht für die regelmäßige Unterhaltsreinigung geeignet.
Ist PreOilCleaner für mein Parkett geeignet?
Die Grundreinigung mit PreOilCleaner ist für geöltes oder geseiftes Parkett vorgesehen. Verträglichkeit an unauffälliger Stelle prüfen, besonders bei quellempfindlichen Hölzern wie Buche, Ahorn oder Holzpflaster. Für lackiertes Parkett ist diese Anwendung nicht vorgesehen.
Wie wird PreOilCleaner verdünnt?
Flasche gut schütteln und mit lauwarmem Wasser mischen:
- Vor dem Erstölen: 1:4 – beispielsweise 100 ml PreOilCleaner mit 400 ml Wasser.
- Zur Grundreinigung: 1:20 – beispielsweise 100 ml PreOilCleaner mit 2 Litern Wasser.
Wie reinige ich Parkett mit PreOilCleaner?
Staub und losen Schmutz entfernen. Mit verdünntem PreOilCleaner nebelfeucht reinigen und gelösten Schmutz aufnehmen. Den Mopp regelmäßig in einem zweiten Eimer mit klarem Wasser ausspülen und gut auswringen. Abschließend mit frischem Wasser nebelfeucht nachwischen. Pfützen und stehendes Wasser vermeiden.
Muss das Holz vor oder nach der Anwendung geschliffen werden?
Vor dem Erstölen das Holz fachgerecht schleifen und entstauben. Nach der Vorbehandlung mit PreOilCleaner aufgestellte Holzfasern bei Bedarf leicht glätten. Bei der Grundreinigung bestehender Öl- oder Seifenoberflächen ist grundsätzlich kein Schliff vorgesehen. Tiefe Schäden oder dicke alte Wachsschichten können jedoch einen Renovierungsschliff erfordern.
Wann und womit wird die Oberfläche nachbehandelt?
Nach der Anwendung von PreOilCleaner vollständig trocknen lassen – etwa 2–8 Stunden, je nach Bedingungen auch länger. Geölte Flächen anschließend mit einem geeigneten OLI NATURA® Öl nachölen; dafür kommen Pflegeöle und zur Nachbehandlung geeignete Öle für die Grundbehandlung infrage. Geseifte Flächen mit einer geeigneten Holzbodenseife nachbehandeln.
Kann PreOilCleaner vor jeder Öl- oder Beizbehandlung eingesetzt werden?
Die Vorbehandlung mit PreOilCleaner ist für ein anschließendes Ölfinish vorgesehen. Vor der Reaktivbeize OLI NATURA® Antique darf PreOilCleaner nicht verwendet werden.
Any questions? - We’re happy to help!
Frequently bought together
*applies to deliveries within Germany. Delivery times for other countries can be found in the shipping conditions